[vc_row][vc_column width=”2/3″][vc_custom_heading text=”Mobile Charger Station Making Adhesive” font_container=”tag:h1|font_size:22|text_align:left|color:%23dd3333″ google_fonts=”font_family:Exo%3A100%2C100italic%2C200%2C200italic%2C300%2C300italic%2Cregular%2Citalic%2C500%2C500italic%2C600%2C600italic%2C700%2C700italic%2C800%2C800italic%2C900%2C900italic|font_style:400%20regular%3A400%3Anormal”][vc_column_text]Mobile charging stations are very useful & found in most malls, showrooms etc. Usually these are made up with mica-mdf boards & acrylic sheets. This is also one of the many applications of Polyfix Gel Glue. In the attached video, we tried to assemble mica-mdf boards & acrylic sheets to make a mobile charging station. The time spent while making it was much less than the other adhesives available. Polyfix Gel Glue can strongly bond the boards & acrylic sheets in minutes without any other help, whereas other glues take up a lot of time (minimum 24 hours) & they also require the material to be clamped or taped to attain adhesion.

Applications

Acrylic to mica pasting, Wood to wood pasting, Stone repair & pasting, WPC to WPC bonding, HDHMR to HDHMR, HPL to HPL,Metal to wood pastingetc

Properties& Benefits

  • Fastest adhesion of difficult substrates such as acrylic sheets, mica boards, wooden objects etc
  • The thick gel glue does not get absorbed, fills the gaps easily & helps in bonding of the two surfaces
  • Attains full pasting & strong bond within minutes, while other adhesives take more than 24 hours to get fully pasted.
  • Easiest application without the need of any king of clamping or nailing.
  • Best quality glue which is weather resistant & doesn’t lose its pasting power even in hot & humid climate

Packing

  • Polyfix Gel Glue is available in 20, 50, 250 gms

Storage

Under 20 degrees/ Cold Storage

How to use

  • Get the boards ready to be assembled.
  • Clean the area of any dirt or water.
  • Paste Mica-MDF board to acrylic sheet by applying Polyfix Gel Glue on the surface & spread it evenly.
  • Put acrylic sheet on the board & let it rest undisturbed for 10-15 minutes.
  • In mere minutes, you will get super strong adhesion & rest of the pieces can be pasted in the same way.
  • Assemble all the boards, according to the design of mobile charger station & get it ready in a very short span of time which is possible only with the help of Polyfix Gel Glue.

Surface requirements:

Area should be clean of any dirt, dust or water droplets

Cure time:

10-15 minutes

Tech specifications
Shelf Life: 5-6 months
1000 cps gel glue

Safety Measures

  • Read the instructions before use
  • Always wear gloves for protection
  • Keep away from eyes & out of children’s reach
  • Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
  • If the glue sticks to your hands, remove it with the help of acetone/ warm water.
  • Do not panic in case of an accident, rush to a doctor.

[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_video link=”https://www.youtube.com/watch?v=VOY8kNA3afE”][us_btn text=”CONTACT US” align=”center” link=”url:http%3A%2F%2Fwww.bensonpolymers.in%2Fcontact-us%2F||”][/vc_column][/vc_row]