Polyfix Debonder, is a solvent based formulation, typically acetone based that dissolves dried up CA. It is a very versatile cyanoacrylate adhesive remover. This material will remove adhesive from work stations, can be used on a wide range of surfaces, and can also be used as a flushing solvent for dispensing systems. It is recommended that before use on a finished part, try the debonder on a small area to make sure that the surface is compatible. It may damage paints, colors and coatings from surfaces
Shelf Life: upto 4 months
Storage: Room temperature
Packaging: 100 ml
- Unsticks items together in a very short span of time
- Removes adhesives from clothing and other materials
- Helps in cleaning workstations, which regularly gets stained with CA glue.
- Identify the spots of set adhesive, which are to be cleaned.
- Pour generous amount of PolyfixDebonder on the area & leave for 10-12 minutes.
- Start prying out the adhesive by using any sharp flat metal sheet, simultaneously clean with a piece of cloth.
- Repeat the process, if there is more adhesive struck to the surface.
- While being used on shiny or bright coloured surfaces, it should be tested on a small area first as after usage the colour or the shine may fade.
- In case of eye contact, rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
- Close the cap firmly after use, to avoid evaporation
- Keep away from children’s reach.
- In case of an accident, consult a doctor.