[vc_row][vc_column width=”2/3″][vc_custom_heading text=”Adhesive To Make Screen Printing Frames” font_container=”tag:h1|font_size:22|text_align:left|color:%23dd3333″ google_fonts=”font_family:Exo%3A100%2C100italic%2C200%2C200italic%2C300%2C300italic%2Cregular%2Citalic%2C500%2C500italic%2C600%2C600italic%2C700%2C700italic%2C800%2C800italic%2C900%2C900italic|font_style:400%20regular%3A400%3Anormal”][vc_column_text]Screen printing is the process of pressing ink through a stencilled mesh screen to create a printed design.To make screen printing frames, fabric/ mesh is to be pasted on various frames. Polyfix CA Gel Adhesive instantly secures the fabric to frame be it metal or aluminium. For wooden frames, high viscosity cyanoacrylate glue is available which fills the gaps present on the wood surface & strong cohesion is provided. Polyfix Spray Activator further increases the fixing speed without any difficulty. The video attached will give you further insight with respect to the process.

Applications

  • Metal/ aluminium frames for screen printing
  • Pre stretched aluminium frames
  • Wooden screen-printing frames
  • Pre stretched wooden frames

Properties& Benefits

  • Single Component CA Adhesive
  • Polyfix Gel Glue instantly fills the gaps & holes which are naturally present in the wood, otherwise pasting will be very difficult.
  • Many brands are available in the market but they are very thin in consistency, due to which they get absorbed by the wood. Polyfix Gel Adhesive is thick & does not get absorbed by the surface
  • Polyfix Spray Activator is an accelerator which expedites the adhesion of the high viscosity gel glue.
  • Polyfix spray activator is non blooming & does not leave white marks after the application.

Packing

  • Polyfix Gel Glue is available in 20, 50, 250 gms,
  • Polyfix Spray Activator is available in 100 ml Glass bottle

Storage

Gel Glue- Under 20 degrees/ Cold Storage
Spray Activator- In normal room temperature

How to use

  • Assemble frames on the stretching machine.
  • Put the fabric/ mesh on the frames & tighten them with the toggle clamps to tighten the fabric.
  • Stretch the fabric completely.
  • Apply Polyfix gel glue over the frame boundary & the fabric & spread it evenly.
  • Spray Polyfix Activator, to decrease the curing time of gel glue.
  • Once the desired adhesion is obtained, cut the fabric with a cutter to separate the frames.
  • Similarly, the whole procedure can be done to make aluminium & metal screen printing frames.

Surface requirements

Area should be clean of any rust or dirt

Cure time: 3-5 minutes

Tech specifications : Shelf Life: 5-6 months
1000 cps gel glue

Safety Measures

  • Read the instructions before use
  • Always wear gloves for protection
  • Keep away from eyes & out of children’s reach
  • Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
  • If the glue sticks to your hands, remove it with the help of acetone/ warm water.
  • Use well ventilated area.
  • Do not panic in case of an accident, rush to a doctor

[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_video link=”https://www.youtube.com/watch?v=mTqZPMVwrfU”][us_btn text=”CONTACT US” align=”center” link=”url:http%3A%2F%2Fwww.bensonpolymers.in%2Fcontact-us%2F||”][/vc_column][/vc_row]